They are applicable to a variety of occasions, as an EMI shielding or be used for environmental sealing. The layer is a metalized fabric. The double-sided pressure-sensitive adhesive is used to install products.

CONDUCTIVE ELASTOMERS

Conductive Elastomers are based on dispersed particles in Elastomers.  They provide highly conduciveness and yet resilient gasketing material for EMI sealing as well as pressure and environment sealing.

They also provide stable and consistent electrical and mechanical properties.  In addition to the choices of size and shape dictated by the enclosing structure and the joint geometry, our range of Conductive Elastomers can be supplied in moulded, extruded and moulded die-cut formats.

This inner product is the amino acid acetate or thermoplastic rubber material.  The outer layer is a metalized fabric.  The double-sided pressure-sensitive adhesive is used to install products.

FABRIC-OVER-FOAM (FoF)

The Fabric-Over-Foam (FoF) product is Halogen free-flame retardant.

The FoF gasket is the conductive fiber cloth which is electrically conductive and corrosion resistant, lined with PU foam of flow compression force.

It provides excellent shielding effectiveness in the range of 100KHz to 1 GHz.

Conductive Tapes are widely used in many categories of devices and equipment.  They are also applied to cellphones for shielding and to its LCD screen and keyboard for the purposes of adhesion, fixing ESD and conductive grounding.

Transformers can be custom-engineered for optimum, corona-free performance.

POWER CONTROL TRANSFORMERS

There are 2 types of Power Control Transformers:-

Toroidal Transformers

-       for special demanding electrical environments

-       for extreme high system operating voltages

High Frequency Transformers

-       high isolation extreme efficiency

-       corona-free operation to 30KV

-       high operational voltage

-       operates from -25^৹C to 150^৹C

MODIFIED PLASTICS

This range of Modified Plastics include Electrically Conductive Plastics (ECP), Thermally Conductive Plastics (TCP) and Reinforce Plastics.

ECP consisting of conductive filler into polymers, is the most widely researched new EMI shielding material.  The main shielding modes are reflection (especially below 10Ghz) and absorption loss during transmission.  It complies with the worldwide directive for ecological compatibility, EoVL, TCO and the EU waste in WEEE directives and is cost effective as well.

Besides, our product range includes general plastics like engineering plastics (PC, PPO, PC/ABS, etc) and high performance plastics.

Automotive Protective remains the automotive industry’s preferred method of sealing.

AUTOMOTIVE PROTECTIVE

The Heat Form Elastomers are widely used as “Gasket” for side mirror sealing and dampening. This includes armrest, 3D cushioning, sealing, noise and airtight dampening.

Besides, the UHMW Film is a “Bi-Extruded” film with rubber weather strip for windows, stopping squeaking and jamming.

It resembles a basic Pn-junction diode which emits light when activated.

When a fitting voltage is applied to the leads, electrons are able to recombine with electron holes within the device, releasing energy in the form of photons.

HIGH POWER LED

This range of products – High Power LED (light-emitting diodes) can be used from 500 milliwatts.  Most of the electronic in LED becomes heat rather than light.  If removed, it is able to keep the junction temperature below 120^৹C to run a maximum lifetime.

Separating the LED drive circulatory froj the LED board, it prevent the heat generated b the driver from raising the LED junction temperature and is available in different LED footprints.  It provides the freedom to select the ED component’s color, brightness and power to suit one’s needs.

They are suitable for a wide range of electronic devices which have EMI (electromagnet interference), RFI (radio frequency interference) or ESD (electrostatic discharge) problems.

METAL FINGERSTOCK

Most engineers use Metal Fingerstock as an ideal EMI shielding material and it can be well used for the small handheld devices to large shielding room where the shielding material needs sliding friction and can be installed on top of rise of the shielding.

Made of beryllium copper (BeCu), a high performance metal, the mechanical and electrical properties make it an ideal shielding material resistant to electromagnetic and radio frequency interference which provides a shielding effect in a wide range of frequency and long life cycle.

It offers over 300 types of Absorbent Fillers (such as Ferrites, Iron-based Alloy, Amorphous Fibers, Nanomaterials, Nanogranular Films, etc).  It is effective in reducing the specular reflection, surface currents, cavity resonances and coupling which are useful in radar systems.  In addition, it provides a wide range of standard Microwave Absorbers to meet special requirements.

This product, meeting the U.L. 94 V-0 requirements, is specially developed for the LED market and is commonly found in LED TVs and is rated as the ONLY material that works consistently in the manufacturing of LED TVs primarily in the holding of the LED light bar.

POWER SUPPLIES

Our product ranges from:-

-       Switching Power Adapter and Battery Charger, OEM/ODM Power Supply & AC Adapter

-       Industrial & Medical SMPS (Switching Mode Power Supplies)

-       Power Supper for POE (Power Over Ethernet)

-       Power Supplies for LED (Light Emitting Diodes) Lighting System